SEH Print Server Manual de instalación Pagina 33

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 49
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 32
LPD Printing (Windows NT 4.0)
Print Server Installation Manual 33
Procedure
Follow the instructions to carry out the installation:
’Installing the TCP/IP Protocol’ Ö33
’Saving the IP Address in the Print Server’ Ö35
’Installing the Microsoft TCP/IP Print Services’ Ö35
’Setting Up the Printer and Configuring the LPR Port’ Ö37
5.1 Installing the TCP/IP Protocol
In order to use your print server in a Windows NT 4.0 system, you
must first install the TCP/IP protocol in the NT server.
If the TCP/IP protocol has already been installed, you may skip to the
section ’Saving the IP Address in the Print Server’ Ö35.
Proceed as follows:
1. Select Control Panel from the 'Start' menu.
2. Double-click Network.
3. Select the Protocols tab. The following dialog appears:
Fig. 17: Network - Protocols
Vista de pagina 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 48 49

Comentarios a estos manuales

Sin comentarios