SEH Print Server Manual de instalación Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 49
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
Information
Print Server Installation Manual 12
Saving the IP Address via the IP Wizard (InterCon-NetTool)
The IP Wizard of the InterCon-NetTool helps you to configure the
TCP/IP parameters, e.g. the IP address. You can easily enter the
desired IP address and save it in the print server using the IP Wizard.
Requirements
; The InterCon-NetTool is installed on the client, see: Print Server
User Manual.
; By means of the InterCon-NetTool you can scan the network via
Multicast, see: Print Server User Manual.
; The router in the network forwards multicast requests.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Select the print server from the print server list.
The print server is displayed in the print server list under 'ZeroConf' with an IP
address from the address range (169.254.0.0/16) which is reserved for ZeroConf.
3. Select InstallationIP Wizard from the menu bar.
The IP Wizard is started.
4. Follow the instructions of the Wizard.
ª The settings are saved.
Abb. 1: InterCon-NetTool - IP Wizard
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 48 49

Comentarios a estos manuales

Sin comentarios