SEH TPG-25 Guía de instalación descargar pdf (Pagina 12)

12 [en] Quick Installation Guide

Assigning an IP Address to the TPG-25

Once the TPG-25 is connected to the network, it checks whether an IP address

can be obtained via the boot protocols BOOTP or DHCP. If this is not the case, the

TPG-25 assigns itself an IP address via ZeroConf from the address range

(169.254.0.0/16) which is reserved for ZeroConf.

Once the TPG-25 has automatically received an IP address via a boot protocol,

you can save a freely definable IP address in the TPG-25.

Wizards facilitate the installation and configuration of network devices via the

InterCon-NetTool. Wizards are subprograms aimed at querying required

parameter values.

The 'IP Wizard' is available for the TPG-25. You can easily enter the desired IP

address and save it in the TPG-25 using the IP Wizard.

Proceed as follows:

1. Start the InterCon-NetTool.

2. Mark the TPG-25 in the device list.

The TPG-25 is displayed in the device list under IP- 'ZeroConf' with an IP address from

the address range (169.254.0.0/16) which is reserved for ZeroConf.

3. Select Installation – IP Wizard from the menu bar.

The IP Wizard is started.

4. Follow the instructions of the IP Wizard.

 The settings are saved.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Sin comentarios

SEH TPG-25 Guía de instalación Pagina 12